I’ve written before about Git Remotes but in my on-going effort to improve my understanding of the tools I use daily I’ve discovered that it is possible to have a single remote push to two different URLs so am revisiting the topic and perhaps writing a little more clearly on it.
Remotes are where other copies of your repository exist and typically where collaboration occurs (i.e. issue tracking, merge requests, bug reports etc.).
The main remote that a repository is configured to use by default is called origin but it is possible to have multiple remotes tracked by your local copy.
Listing Remotes
List remotes with git remote [-v] the -v flag will show the URLs that are stored for the short-cut.
❱ git remote -v
forgejo forgejo@forgejo.hopto.org:nshephard/mvdate.git (fetch)
forgejo forgejo@forgejo.hopto.org:nshephard/mvdate.git (push)
origin git@gitlab.com:nshephard/mvdate.git (fetch)
origin git@gitlab.com:nshephard/mvdate.git (push)You can get more information about a remote using git remote show origin
❱ git remote show origin
* remote origin
Fetch URL: git@gitlab.com:nshephard/mvdate.git
Push URL: git@gitlab.com:nshephard/mvdate.git
HEAD branch: main
Remote branches:
main tracked
refs/merge-requests/18/head new (next fetch will store in remotes/origin
refs/pullreqs/15 stale (use 'git remote prune' to remove)
refs/remotes/origin/nshephard/update-pre-commit stale (use 'git remote prune' to remove)
refs/remotes/origin/nshephard/update-readme stale (use 'git remote prune' to remove)
Local branches configured for 'git pull':
main merges with remote main
nshephard/fix-mtime merges with remote nshephard/fix-mtime
nshephard/update-pre-commit merges with remote nshephard/update-pre-commit
Local ref configured for 'git push':
main pushes to main (local out of date)This can be useful to show you what you need to tidy up if there are lots of stale branches around. In this example I can run git remote prune origin as advised to remove these.
Default Remote
The default remote to push to can be set with the following command, it will likely already be set to origin so this would not change anything.
git config --local remote.pushDefault originThis adds the following to your .git/config if it wasn’t already there.
[remote]
pushDefault = originAdding Remotes
It is straight forward to add a remote with git remote add <shortcut> <URL> where the URL is either the https or the git URL.
❱ git remote add forgejo forgejo@forgejo.hopto.org:nshephard/mvdate.gitThis adds details to your .git/config so that it has the following
[remote "origin"]
url = git@gitlab.com:nshephard/mvdate.git
fetch = +refs/heads/*:refs/remotes/origin/*
fetch = +refs/merge-requests/*/head:refs/pullreqs/*
[remote "forgejo"]
url = ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git
fetch = +refs/heads/*:refs/remotes/forgejo/*
[remote]
pushDefault = origin
[branch "main"]
remote = origin
merge = refs/heads/mainTwo remotes are defined, origin and forgejo, the default to push to is set to origin and the main branch is setup to track the remote origin.
Pushing to specific remote
With two remotes setup you can choose, at the branch level, where to push your changes by specifying the remote you wish to use. If you wanted to push a newly created branch, change-just-for-forgejo, to the newly added forgejo remote you would configure it with.
❱ git switch -c change-just-for-forgejo
❱ git commit --allow-empty -m "Test push just to forgejo"
❱ git push --set-upstream forgejo change-just-for-forgejo
Enumerating objects: 2, done.
Counting objects: 100% (2/2), done.
Writing objects: 100% (2/2), 376 bytes | 376.00 KiB/s, done.
Total 2 (delta 0), reused 0 (delta 0), pack-reused 0
remote:
remote: Create a new pull request for 'change-just-for-forgejo':
remote: <https://forgejo.hopto.org/nshephard/mvdate/compare/main...change-just-for-forgejo>
remote:
remote: . Processing 1 references
remote: Processed 1 references in total
To ssh://forgejo.hopto.org:1234/nshephard/mvdate.git
- [new branch] change-just-for-forgejo -> change-just-for-forgejo
branch 'change-just-for-forgejo' set up to track 'forgejo/change-just-for-forgejo'.Git reports that the local change-just-for-forgejo has been setup to track forgejo/change-just-for-forgejo and the following entry has been added to .git/config
[branch "change-just-for-forgejo"]
remote "forgejo"
merge = refs/heads/change-just-for-forgejoA Note on SSH Ports
If a remote is using a non-standard port for SSH connections (i.e. anything other than 22) then you have to use a different format for specifying the remote URL. Instead of forgejo@forgejo.hopto.org:nshephard/mvdate.git you must explicitly state the protocol (ssh://) and include the port so that it reads ssh://forgejo@forgejo.hopto.org:1234 and so to add it you would be added with the following
❱ git remote add forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git
❱ git remote -v
forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (fetch)
forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (push)
origin git@gitlab.com:nshephard/mvdate.git (fetch)
origin git@gitlab.com:nshephard/mvdate.git (push)I use a non-standard port and so use that convention for the remainder of this article. If you do not use a non-standard port you can either change the port (1234) to the default (22) or use the conventional syntax for referring to the remote.
Mirroring Remotes
The really neat thing is that it is possible to have a local repository track multiple remotes, which means when you push your changes it will go to both. You could configure an alias to push to both of the remotes we currently have defined, but there is an excellent post on StackOverflow that shows how to do this with Git itself because each remote can have multiple pushurls.
As we have added a second remote to our configuration our .git/config for mvdate our configuration currently looks like this.
[remote "origin"]
url = git@gitlab.com:nshephard/mvdate.git
fetch = +refs/heads/*:refs/remotes/origin/*
fetch = +refs/merge-requests/*/head:refs/pullreqs/*
[remote "forgejo"]
url = ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git
fetch = +refs/heads/*:refs/remotes/forgejo/*
[remote]
pushDefault = origin
[branch "main"]
remote = origin
merge = refs/heads/main
[branch "change-just-for-forgejo"]
remote = forgejo
merge = refs/heads/change-just-for-forgejoAs above, there are two remotes are defined, origin and forgejo, the default to push to is set to origin and the main branch is setup to track origin whilst the change-just-for-forgejo branch is setup to track forgejo.
❱ git remote -v
forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (fetch)
forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (push)
origin git@gitlab.com:nshephard/mvdate.git (fetch)
origin git@gitlab.com:nshephard/mvdate.git (push)How do we get the origin remote setup and configured to push to both gitlab and forgejo? This can be done using the set-url --add --push options to git remote, below we add forgejo as a push target to origin.
NB Note I use a non-standard SSH port in the following, see above note.
❱ git remote set-url --add --push origin ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git
❱ git remote -v
forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (fetch)
forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (push)
origin git@gitlab.com:nshephard/mvdate.git (fetch)
origin ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (push)But this has removed the original push target under origin which pointed to gitlab so we need to add that back in.
❱ git remote set-url --add --push origin git@gitlab.com:nshephard/mvdate.git
❱ git remote -v
forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (fetch)
forgejo ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (push)
origin git@gitlab.com:nshephard/mvdate.git (fetch)
origin ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (push)
origin git@gitlab.com:nshephard/mvdate.git (push)We now have two push targets on origin, one pointing to gitlab.com (using the default port 22) and one pointing to forgejo.hopto.org (on port 1234) and as the default target is origin when we git push it will send the changes to both. We still have the forgejo remote defined and it only tracks the forgejo URL.
We can test this with an empty commit on a new branch, test-both, which we first create.
❱ git switch -c test-both
❱ git commit --allow-empty -m "Testing pushing to GitLab and Forgejo"
[test-both c07caf6] Testing pushing to GitLab and Forgejo
❱ git push
Enumerating objects: 1, done.
Counting objects: 100% (1/1), done.
Writing objects: 100% (1/1), 210 bytes | 210.00 KiB/s, done.
Total 1 (delta 0), reused 0 (delta 0), pack-reused 0
remote:
remote: Create a new pull request for 'test-both':
remote: <https://forgejo.hopto.org/nshephard/mvdate/compare/main...test-both>
remote:
remote: . Processing 1 references
remote: Processed 1 references in total
To ssh://forgejo.hopto.org:1234/nshephard/mvdate.git
- [new branch] test-both -> test-both
branch 'test-both' set up to track 'origin/test-both'.
Enumerating objects: 26, done.
Counting objects: 100% (26/26), done.
Writing objects: 100% (26/26), 16.75 KiB | 8.37 MiB/s, done.
Total 26 (delta 0), reused 0 (delta 0), pack-reused 0
remote:
remote: To create a merge request for test-both, visit:
remote: <https://gitlab.com/nshephard/mvdate/-/merge_requests/new?merge_request%5Bsource_branch%5D=test-both>
remote:
To gitlab.com:nshephard/mvdate.git
- [new branch] test-both -> test-both
branch 'test-both' set up to track 'origin/test-both'.The output above shows that the branch test-both was pushed to both the URLs we have configured as push targets to origin and if you visit the repositories you will find the branches now exist there.
Deleting Remotes
In my use case I simply want to push both remotes so that they mirror each other so I can delete the forgejo remote. This will leave the push URL for that remote under the configuration for origin and allows us to set any branch to use the origin as a the remote and any changes will be pushed to both.
There may be instances where you want to leave the additional remote in place if you wanted to push some changes just to that remote so its not essential that you remove it, but if you want to you can delete reference to a remote from your local configuration.
❱ git remote remove forgejo
❱ git remote -v
origin git@gitlab.com:nshephard/mvdate.git (fetch)
origin ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git (push)
origin git@gitlab.com:nshephard/mvdate.git (push)Because the change-just-for-forgejo was setup to track the forejo remote we would need to change that target, we can do so with the following
❱ git switch change-just-for-forgejo
❱ git branch --set-upstream-to=origin/change-just-for-forgejo change-just-for-forgejoThis changes the remote target for the branches definition and our configuration now looks like the following.
[remote "origin"]
url = git@gitlab.com:nshephard/mvdate.git
fetch = +refs/heads/*:refs/remotes/origin/*
fetch = +refs/merge-requests/*/head:refs/pullreqs/*
pushurl = ssh://forgejo@forgejo.hopto.org:1234/nshephard/mvdate.git
pushurl = git@gitlab.com:nshephard/mvdate.git
[remote]
pushDefault = origin
[branch "main"]
remote = origin
merge = refs/heads/main
[branch "change-just-for-forgejo"]
remote = origin
merge = refs/heads/change-just-for-forgejoConclusion
Having a local repository push to two remotes is a simple way of a mirroring. Whether you have a use case for it depends on what you are doing. I could easily imagine this could get very complicated if changes were pushed by others to each remote, but I wouldn’t be surprised if Git is regularly used in this way by others.
Of course if you want to push a branch that you wish to keep private to one remote only then you would have to be very careful in how you use this setup. The original StackOverflow solution inspired that this post suggests creating an independent remote (e.g. all) so that you can push changes to origin or the second remote (in this example forgejo) and use all only when you wish to push changes to both.
Its been good for me to return to a topic I’ve delved into in the past, this second time round I feel I’ve got a slightly better grasp of what I’m doing and have a neater solution to achieve what is required.
Links
Reuse
Citation
@online{shephard2024,
author = {Neil Shephard},
title = {Git {Remotes} {Revisited}},
date = {2024-02-17},
url = {https://blog.nshephard.dev//posts/git-remotes-revisited},
langid = {en}
}